Sun 20 May 2012
An In Vitro Biomechanical Comparison of a Locking Compression Plate Fixation and Kerf Cut Cylinder Fixation for Ventral Arthrodesis of the Fourth and the Fifth Equine Cervical Vertebrae
Veterinary Surgery December 2010 39 8 980-990
Objectives: To (1) define mechanical properties in flexion, extension, and left lateral bending of cadaveric equine 4th and 5th cervical (C4–C5) articulations, (2) compare biomechanical properties of C4–C5 when stabilized with a kerf cut cylinder (KCC) compared with a ventrally placed 4.5 mm locking compression plate (LCP).
Study Design: In vitro biomechanical investigation.
Sample Population: Cadaveric adult equine cervical vertebral columns (n=54).
Methods: Cervical vertebrae aged by horse dentition and size measured from radiographs were divided into 3 age groups then randomly allocated to 3 groups. The C4–C5 articulation was treated differently in each of the groups: KCC group; KCC-implanted LCP group; 8-hole 4.5 mm LCP implanted and intact group; no implant. Specimens were randomly subdivided into 1 of 3 loading conditions, before testing to failure under 4-point bending. Stiffness, yield bending moment, failure bending moment, and failure mode were recorded. General linear models were performed to analyze associations between biomechanical properties and test variables.
Results: All specimens failed at the C4–C5 intervertebral articulation. The cervical vertebrae with the LCP construct had significantly higher stiffness, yield bending moment, and failure bending moment than the KCC-implanted cervical vertebrae. Failure modes differed between groups and varied with loading direction: KCC group, fractures of C5 associated with the KCC were common; LCP group, screw pull out or fractures (of C4 and C5 bodies, during extension and the caudal aspect of C4 during left lateral bending) were common; and intact group, subluxations were most common.
Conclusions: In this model, LCP constructs had superior biomechanical properties compared with KCC constructs. Further research investigating the effect of repetitive loading is indicated.
Jobs
OrthoVet Books

FLOYD
Equine podiatry
1st ed., 480 pages, 654 ill., Elsevier, July 2007
List price: € 86,99
Sell price: € 74,00

FACKELLMAN-AUER-NUNAMAKER
AO Principles of equine osteosynthesis
1st ed., 390 pages, 500 ill., Thieme, August 2000
List price: € 100,00
Sell price: € 85,00

STASHAK
Practical guide to lameness in horses
1st ed., 448 pages, 159 ill., Williams & Wilkins, June 2002
List price: € 53,00
Sell price: € 45,00

MUIR
Advances in the canine cranial cruciate ligament
1st ed., 289 pages, 350 ill., John Wiley & Sons, September 2010
List price: € 119,00
Sell price: € 101,00

BAXTER
Adams & Stashak's lameness in horses
6th ed, 1245 pages, 2500 ill., John Wiley & Sons, March 2011
List price: € 161,00
Sell price: € 137,00




